Electrical Drafting Services

Yes, documenting an existing installation into accurate as-built drawings is a common part of this service, and we're explicit about which details are confirmed versus inferred from incomplete records.

Yes, this includes panel layout, wiring schematics and cable schedules, drafted with real component footprints in mind so the panel builder can work from the layout directly.

Yes — where a project is running in a shared BIM environment, electrical documentation can be coordinated for clash detection against other discipline models before installation.

Cable and conductor schedules are cross-checked against the schematic they're derived from as part of our review process, rather than compiled independently and reconciled later.

Electrical drawings are often the primary reference during a much later fault-finding exercise or facility upgrade, sometimes long after the original installation team has moved on — clear, honestly-flagged documentation at handover pays off precisely at that later, harder-to-predict moment.

Yes, we structure schematics, schedules and physical labelling references so a commissioning electrician can move between them without extra translation effort, which speeds up commissioning considerably compared to loosely cross-referenced documentation.

Yes, control panel schematics covering logic, control voltage circuits and I/O are drafted alongside power distribution schematics where a project needs both.

Yes, where a panel builder has an established internal drawing convention, we draft to match it so the output slots directly into their existing documentation library.

Yes, physical routing drawings can be produced alongside schematics where a project's installation team needs a clear routing reference, not just the electrical logic.

Yes, working within an existing drawing set to reflect a specific modification is a common and more efficient approach than a full redraft, provided the existing drawing set is a reasonably accurate starting point.

Yes, single-line diagrams for solar and other renewable generation and interconnection systems are covered under this service.

Electrical documentation is drafted to reflect whatever standard and hazardous-area classification the electrical engineer's design specifies, rather than assumed independently by the drafting process.

Yes, lighting layout, circuiting and switching documentation for commercial fit-outs is available, coordinated against the architectural reflected ceiling plan.

Yes, upgrade documentation reflecting new load calculations and switchboard capacity is a common request, usually starting with as-built verification of the existing switchboard.

Yes, earthing and lightning protection layout documentation can be produced where this is part of the electrical engineer's design scope.

Yes, MCC schematics and layout drawings for industrial control applications are covered under this service.

Yes, single-line diagrams and schematics for combined solar generation and battery storage systems are within scope.

Yes, cable schedules are structured so a change in load calculation can be reflected consistently across the schedule and schematic, rather than requiring a full manual reconciliation each time.

Where this falls within the electrical engineer's design scope, yes — schematics for fire alarm interconnection and emergency systems can be produced alongside general power and lighting documentation.

Yes, documentation for temporary construction power or generator-fed installations is a common request, particularly for larger construction sites with staged power requirements.

Yes, where a utility provider has specific drawing or application format requirements for a new connection, we draft to match them.

Yes, documenting sub-metering, tenancy distribution boards and shared services for a multi-tenancy facility is a common and slightly more involved documentation task we regularly take on.

Yes, standby generator integration, including changeover switching and interlocking logic, is shown on single-line diagrams where this is part of the electrical design.

Yes, a simplified summary diagram alongside the full technical schematic can be produced where a project needs to communicate the electrical design to a non-technical audience such as a building owner or tenant.

Yes, single-line diagrams and circuit documentation for EV charging installations, including load management considerations, are within scope as this becomes an increasingly common addition to both commercial and residential electrical designs.

Yes, panel schedule formatting is adapted to your team's preferred layout and level of detail where this is specified upfront.

Yes, documenting an interim or staged electrical configuration alongside the final design is a common requirement on projects that need partial power availability during construction.

Yes, schematics covering combined solar, battery and generator systems with the associated switching and control logic are within scope, following the electrical engineer's design intent.

Yes, reconciling an as-built cable schedule against physical labels installed on site is a standard part of our as-built documentation process, flagging any labels that don't match existing records.

Yes, including the higher-density power distribution and dedicated cooling-related electrical documentation this equipment type typically requires, based on the electrical engineer's design.